As an Amazon Associate I earn from qualifying purchases.1. qtx
Qtx Subwoofer Filter for Hi-Fi & PA Loudspeaker Systems 400W
qtx - Crossover frequency 120Hz. Power rms 160W. Connections by solder terminals. Damping factor of 12dB/oct. Power peak 400W.
| Brand | qtx |
| Manufacturer | qtx |
| Height | 9.3 cm (3.66 Inches) |
| Length | 5.1 cm (2.01 Inches) |
| Width | 8.2 cm (3.23 Inches) |
| Part Number | 900.582UK |
| Model | 900.582UK |
2. Tyenaza
DC10-24V 22Hz-300Hz Low-Pass Filter Subwoofer Volume Control Preamp Circuit Module, Subwoofer Volume Board
Tyenaza - Anti-interference: reasonable circuit board layout, small noise, beautiful component layout. High efficiency: the ic holder can be soldered at any time to feel the effect of different op amps and enhance the playability.
Better performance, noise is very small. Real time monitor: designed with LED indicators to monitor power state in real time.
Simple to operate: the board is simple and beautiful in design, and the wiring is reasonable, which makes the board have a very high signal to noise ratio. Good durability material: the adjustment potentiometer is made of fully sealed type, and the input and output ends are made of pure copper terminals. The wiring is very convenient.
| Brand | Tyenaza |
| Manufacturer | Tyenaza |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Tyenazanfvu7kir10 |
3. Kafuty
Kafuty 1000W Hi-Fi Audio Speaker Divider Board Audio Crossover Filters Frequency Distributor Subwoofer Crossover Filters for 10-18 inch High-power Bass Speaker System
Kafuty - High performanceHigh quality material, durable and not easy to breakdown. Special designthis frequency divider is a professional speaker with high power frequency divider, suitable for 10-18 inch high power bass use.
Long servicethe service life of frequency divider is longer and suitable for 10-18 inch high-power bass to use. Excellent functionThe function of dissipation of this frequency divider heat is excellent. Powerful: 4-8 euros, power;1000w, length: 141mm / 5. 6in width: 112mm / 4. 4in.
| Brand | Kafuty |
| Manufacturer | Kafuty |
| Height | 4 cm (1.57 Inches) |
| Length | 14.1 cm (5.55 Inches) |
| Weight | 1.08 kg (2.38 Pounds) |
| Width | 11.2 cm (4.41 Inches) |
| Part Number | Kafutys1mrceoidt |
4. Denash
Speaker High Power High Frequency Divider, Denash 1000W Frequency Divider, Hi-Fi Subwoofer Audio Speaker Crossover Filters for 10-18 inch High Power Bass
Denash - Ultra-large grain capacitance, ultra-high power inductance and resistance are adopted. Professional speaker high power high frequency divider, suitable for 10-18 inch high power bass to use.
High quality material, durable and not easy to breakdown. The heat dissipation function is excellent. Suitable for 10-18 inch high-power bass to use. The service life of frequency divider is longer.
| Brand | Denash |
| Manufacturer | Denash |
| Height | 4 cm (1.57 Inches) |
| Length | 14.1 cm (5.55 Inches) |
| Weight | 1.08 kg (2.38 Pounds) |
| Width | 11.2 cm (4.41 Inches) |
| Part Number | 7ntpg9ucfi |
5. Ailao
Crossover Filter 200W Pure Bass Subwoofer Frequency Divider Audio Speaker Single Channel Crossover Filter
Ailao - Maximum power: 200w, frequency response: 40Hz-400Hz. Crossover filter can be used in bass and subwoofer DIY. You have to choose a power of 200W under 200W, you can choose a subwoofer under 5-8 inches.
Stubbs switch: adjustable range from approximately bass response: 3Hz. The applicable impedance of the Crossover Filter is 4-8 ohms.
| Brand | Ailao |
| Manufacturer | Ailao |
| Height | 3.7 cm (1.46 Inches) |
| Length | 8.8 cm (3.46 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 5.4 cm (2.13 Inches) |
| Part Number | Ailao3ih9w6tu87 |
6. qtx
2 x Passive Crossovers 120Hz Subwoofer Filter 4ohm 600W 900.584
qtx - Impedance 4 ohms. Damping factor of 12dB/oct. Crossover frequency 120Hz. Subwoofer filters - Total of 2. Connections by solder terminals.
| Brand | qtx |
| Manufacturer | QTX |
| Part Number | 900.584UK |
| Model | 900.584UK |
7. Tangxi
Hi-Fi Treble Alto Bass Soundshelf Crossover Filters Woofer and Tweeter for Subwoofer HiFi Speaker, 800W 3-Way Crossover Filters Frequency Divider, 600/ 4500Hz Audio & Video Frequency Crossover Parts
Tangxi - To separate the mixed audio signal into a treble, bass, alto, mid, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes.
Wide applications: treble, alto and bass frequency dividing, widely used for 8-12inches speakers. High quality and super durability: wire wound ceramic resistor and high-quality metal film capacitors, ensure its large load power, long-term durability, never burnout.
Circuit board design with precise cutouts and lines, free for welding, very suitable for DIY. Perfect hifi sound quality: make the treble clear, enrich the alto effect, and increase the intensity of the bass, freely enjoy clear and natural music.
| Brand | Tangxi |
| Manufacturer | Tangxi |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.5 kg (1.1 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Tangxiawr8smozh6 |
| Model | Tangxiawr8smozh6 |
8. Myhoomowe
Myhoomowe 1 Piece Divider Speaker Crossover Subwoofer Crossover Subwoofer Frequency Speake Crossover Filter
Myhoomowe - This is normal, The human voice smaller, No treble, . After installation of the dividerFeeling more bass, Speaker sound smaller. Woofer is not affected by the high-frequency signal interference, the intensity bigger.
57 # large inductance, D16mm, H30mm speakers dedicated large current anode capacitance. Dividing the total frequency signal of amplifier, Barrier to high-frequency signals, Bass and subwoofer through, . Subwoofer divider. Pure bass audio professional Subwoofer Frequency Divider Speaker Crossover Filter.
| Brand | Myhoomowe |
| Manufacturer | Myhoomowe |
| Height | 5 cm (1.97 Inches) |
| Length | 18 cm (7.09 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 500314721 |
| Model | 500314721 |
9. Amoergel
Amoergel 1 Piece Divider Speaker Crossover Subwoofer Crossover Subwoofer Crossover Filter
Amoergel - Dividing the frequency signal of amplifier, and subwoofer through, Barrier to high-frequency signals, . Woofer is not affected by the high-frequency signal interference, D16mm, the intensity bigger.
57 # inductance, H30mm speakers dedicated current anode capacitance. Subwoofer divider. This is normal,. Pure audio professional Subwoofer Frequency Divider Speaker Crossover Filter. After installation of the dividerFeeling more, No treble, The human voice smaller, Speaker sound smaller.
| Brand | Amoergel |
| Manufacturer | Amoergel |
| Height | 5 cm (1.97 Inches) |
| Length | 18 cm (7.09 Inches) |
| Weight | 0.03 kg (0.07 Pounds) |
| Width | 7 cm (2.76 Inches) |
| Part Number | 500314721 |
| Model | 500314721 |
Tyenaza - Anti-interference: reasonable circuit board layout, small noise, beautiful component layout. High efficiency: the ic holder can be soldered at any time to feel the effect of different op amps and enhance the playability.
Kafuty - High performanceHigh quality material, durable and not easy to breakdown. Special designthis frequency divider is a professional speaker with high power frequency divider, suitable for 10-18 inch high power bass use. Long servicethe service life of frequency divider is longer and suitable for 10-18 inch high-power bass to use. Excellent functionThe function of dissipation of this frequency divider heat is excellent. Powerful: 4-8 euros, power;1000w, length: 141mm / 5. 6in width: 112mm / 4. 4in.
Denash - Ultra-large grain capacitance, ultra-high power inductance and resistance are adopted. Professional speaker high power high frequency divider, suitable for 10-18 inch high power bass to use. High quality material, durable and not easy to breakdown. The heat dissipation function is excellent. Suitable for 10-18 inch high-power bass to use. The service life of frequency divider is longer.
Ailao - Maximum power: 200w, frequency response: 40Hz-400Hz. Crossover filter can be used in bass and subwoofer DIY. You have to choose a power of 200W under 200W, you can choose a subwoofer under 5-8 inches. Stubbs switch: adjustable range from approximately bass response: 3Hz. The applicable impedance of the Crossover Filter is 4-8 ohms.
Tangxi - To separate the mixed audio signal into a treble, bass, alto, mid, and then were sent to the corresponding treble, bass speaker unit in playback, resulting in enhance the sound quality purposes.
Myhoomowe - This is normal, The human voice smaller, No treble, . After installation of the dividerFeeling more bass, Speaker sound smaller. Woofer is not affected by the high-frequency signal interference, the intensity bigger. 57 # large inductance, D16mm, H30mm speakers dedicated large current anode capacitance. Dividing the total frequency signal of amplifier, Barrier to high-frequency signals, Bass and subwoofer through, . Subwoofer divider. Pure bass audio professional Subwoofer Frequency Divider Speaker Crossover Filter.
Amoergel - Dividing the frequency signal of amplifier, and subwoofer through, Barrier to high-frequency signals, . Woofer is not affected by the high-frequency signal interference, D16mm, the intensity bigger. 57 # inductance, H30mm speakers dedicated current anode capacitance. Subwoofer divider. This is normal,. Pure audio professional Subwoofer Frequency Divider Speaker Crossover Filter. After installation of the dividerFeeling more, No treble, The human voice smaller, Speaker sound smaller.
