Top 10 NATO Top Handle UK – Camcorder Stabilizers & Supports

As an Amazon Associate I earn from qualifying purchases.



Camcorders, Camera Cage, 1955, SMALLRIG NATO Clamp Handle with Shoe Mounts for Cameras, Action Cameras

SMALLRIG #ad - So that makes it very easy to use for balancing the camera for handheld use. It has three different built in cold shoe mounts, one on the top, and two on each end of the handle. It is easily removable without any tools, so that you can keep your accessories attached to it and then just remove the handle for packing the gear in a smaller package.

Small in size, it is a great addition for people who prefer a compact setup. It comes with an allen wrench on the side, which attaches via magnet inside the handle. Smallrig quick release dslr handle 1955 is designed for the top orientation with the nato adapter and has quick release knob on the bottom. Note: the grip part is only 118mm long, so it may be a bit short for someone who has a big palm.

Compatible with nato rails, ch5 cage, it is usually used with smallrig cages for small-sized mirrorless cameras: such as a6500 cage, a6300 cage, GH4 Cage, G85 cage, a7sii cage, a7riii cage, G7 cage, etc. You can use it for different purposes, you can loosen those screws on the other side and can change front to back orientation according to your need. On one side, it has several different style of mounting points: 1/4'' and 3/8'' threads and locating hole for ARRI.
ManufacturerSMALLRIG #ad
Height6.6 cm (2.6 Inches)
Length11.8 cm (4.65 Inches)
Width2.5 cm (0.98 Inches)
Part NumberSA01-1955



2084, SMALLRIG NATO HandleRubber Cover with QR Safety NATO Rail for Video Camera Rig

SMALLRIG #ad - Mounting points there comes with multiple 1/4" and 3/8" threaded holes on the area of the NATO clamp, which provided many mounting points for attaching additional accessories. For all cages smallrig nato handle 2084 is exclusively designed for all cage mounts in the market to bring out the camera’s maximum potential.

It is an assembly of a nato handle 2005 and NATO rail 1409. Besides, nato handle 2005 is rubber coated, thus it offers a very good handheld experience for the cameraman. Cold shoe the nato handle 2005 features a cold shoe mount on top to add on-camera lights, microphone shock mounts, or other shoe mount accessories, such as SMALLRIG Magic Arm 1497 can via cold shoe on the top for monitor.

Safety pins the nato rail 1409 can be mounted on camera cages or cheese plates with two 1/4'' screws, it comes with two safety pins to stop the NATO handle from sliding off. Quick release it comes with quick attaching and detaching for handheld shooting, works with other accessories for DIY needs.
ManufacturerSMALLRIG #ad
Height8.2 cm (3.23 Inches)
Length14 cm (5.51 Inches)
Width4.6 cm (1.81 Inches)
Part Number2084-CF



SMALLRIG Rotating NATO Handle for Camera Cage, HTN2362

SMALLRIG #ad - Besides, there is a built-in allen wrench on the handle to help you assemble or disassemble the screw. Nato clamp handlesmallrig rotating nato handle htn2362 is designed to provide a comfortable handheld experience and mounting threads for accessory such as monitor, microphone and light.

Mounting pointsthe nato handle features multiple 1/4"-20 and 3/8"-16 threaded holes for arri standard for accessory attachment, such as SMALLRIG Monitor Mount BSE2294/BSE2348 and SMALLRIG Magic Arm 2115. Materialthe handle integrates with wood and aluminum alloy material to make it more comfortable.

Buit-in cold shoethe handle features cold shoe for microphone, light or sound receiver, the cold shoe in front features anti-off button to protect your setup from slipping off. Quick releasethe quick release handle htn2362 is able to rotate 360 degree and secures to any cage with NATO rail on the top or side. It allows you to switch between top handle and side handle quickly.
ManufacturerSMALLRIG #ad
Height2.7 cm (1.06 Inches)
Length15.6 cm (6.14 Inches)
Width7.35 cm (2.89 Inches)
Part NumberHTN2362-CF



NICEYRIG NATO Clamp Top Handle Grip with 15mm Rod Clamp Shoe Mounts for DSLR Camera Camcorder Cage Rig

NICEYRIG #ad - Made of aluminum alloy, lightweight and durable. Get your handle off without needing an Allen key every time. Note: please do use the hex spanner to re-tighten the screw beside the rod clamp to ensure safe, if the Nato Clamp is not tight enough.

There are 1/4"and 3/8" mounting points for additional accessories attachment. The 15mm rod rail clamp allows for attachment of EVF mount or microphone shock mount and so on. Simply slide onto NATO rail and tighten down the wingnut screw. The nato cheese handle is a sliding top handle for moving shoots, compatibility with small-sized mirrorless camera cages and swat nato rails.

You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle. The nato handle is designed for quick release attaching and detaching on the camera. The handle is equipped with two shoe mounts at both ends for attaching on camera lights, microphone shock mounts, etc.
ManufacturerNICEYRIG #ad
Part NumberNato handle-122
ModelNato handle-122



SMALLRIG NATO Top Handle with 15mm Rod Clamp and Cold Shoe for Camera Cages, 2027

SMALLRIG #ad - Adjustable the grip part can be adjustable forward and backward by 90mm, which helps you to find a comfortable gripping point. Also, you can also attach a smalLRIG Microphone Shock Mount 1802 for Microphone on top. Modular top handle smallrig nato top handle 2027 is designed for customized camera rigs or DIY camera solutions, cold shoe, which equipped with a 15mm rail clamp, threaded holes and locating holes for ARRI standard.

15mm rod clamp with the 15mm rod clamp, you could attach a smallrig 15mm rod 1053 and then a single Rod clamp 860 or Rod Clamp Rod Mount 1112, attach a 15mm rodnot include on this handle, which allows you place a monitor on top of your rig. Mounting points the nato handle features a cold shoe and multiple 1/4” and 3/8” thread holes and locating holes for ARRI standard for other accessories attachment, such as SMALLRIG BallHead 761/1875 or Magic Arm 1497 for monitor.

A hex spanner is smartly hidden in a slot of the handle by magnet, so you don't need to pack it up after shooting. Quick release the nato handle equipped with a nato clamp, which enables to slide onto a smallrig safety NATO Rail 1409 / 1195NOT INCLUDE and then tighten down the wingnut, you can fix this handle on top of your rig in seconds.
ManufacturerSMALLRIG #ad
Height3.3 cm (1.3 Inches)
Length15.9 cm (6.26 Inches)
Width6.6 cm (2.6 Inches)
Part Number2027-CF



HTN2670, SMALLRIG NATO Top Handle with Record Start/Stop Remote Trigger for Sony Mirrorless Cameras

SMALLRIG #ad - The top handle htn2670 featuring multiple 1/4"-20, 3/8" -16 and ARRI 3/8" -16 threads for accessories such as Monitor Mount 2348. Smallrig htn2670 is designed to provide a comfortable grip and features record button on top to control camera start/stop.

Smallrig nato top handle htn2670 design for sony mirrorless cameras. Compatibility with an array of cameras that use the Sony MULTI protocol. It's compatibility with an array of cameras that use the Sony MULTI protocol, such as such as the Sony A6 and A7 series cameras. Smallrig htn2670 integrates with three cold shoe mounts, light, with one of which is designed with an anti-slip button allows mounting mic, as well as Monitor Mount 2346.

Compatibility:sony a7/a7r/a7s, a7iii/a7riii,sony a7r iv, a7ii/a7rii/a7sii, a9/a9 ii, a5100/a6000/a6100/a6300/a6400/a6500/a6600, rx100 iii/rx100 iv/rx100 v/rx100 vi/rx100 viI/ZV1. Optional nato rail 2172 and 1409 are sold separately. The includes cable is sony multi to type c standard, and the front of the handle features a slot for cable tethering.
ManufacturerSMALLRIG #ad
Height7.3 cm (2.87 Inches)
Length13.9 cm (5.47 Inches)
Width2.74 cm (1.08 Inches)
Part NumberHTN2670B-CF



R008 Camera/DSLR Top Handle Grip ARRI Locating Hole Connection with Cold Shoe Mount compatible for A6400 6300 Metal Low Angle Shots Microphone 15MM NATO Rail Rod Clamp Tube Hole Camera Rig Cage

HAFOKO #ad - It's easy to get low angle shots with the top handle grip. Not used directly to camera, it comes with ARRI hole connection. Extension camera handle: on the top, there is a cold shoe for microphone, top of back of the handle, monitor mounts, back, lED lights, front, EVF mounts.

Allen wrench is included to fix. This uurig top handle r008 is designed for handheld shooting, can holds the weight of a large cage rig with various attachments with ease. Fits for most camera/dslr cage with ARRI hole to build a professional and powerful video shooting rig set for filming. Mounting points: the uurig camera handle with abundance of 1/4inch and 3/8inch mounting points and ARRI standard locating hole for accessory attachment, EVF mount, the built-in 15mm rod clamp makes possible connecting a microphone mount, etc.
BrandHAFOKO #ad
ManufacturerHAFOKO #ad
Part NumberR008 camera handle



2950, SMALLRIG Lightweight NATO Top Handle with Quick Release NATO Rail for Camera Cage

SMALLRIG #ad - Please do not use it overweight. Ergonomic design: the handle 2950 is composed of aluminum alloy and non-slip soft silicone, ergonomic design, compact structure, and low center of gravity, convenient for users to carry.

Multiple mounting points:additional mounting features include two integrated shoe mounts, multiple 1/4"-20 accessory threads, flash, and multiple 3/8"-16 ARRI-style anti-twist accessory mounts, such as Monitor Mount with Cold Shoe Mount 2905, cold shoe interface can expand microphone, etc. Note: the maximum bearing capacity of the handle is 15kg. Perfect design: the smallrig 2950 is designed to provide users with a comfortable holding experience for a long period of time, as well as a light and convenient way to carry.

360-degree rotation: the handle supports 360-degree rotation to adjust the comfortable grip angle, and easy horizontal and vertical shooting. Fixing method: it is locked via nato clamp or quick Release NATO Rail BUN2468, which solves the problem of compatibility with the Cage and realizes quick disassembly and assembly.
ManufacturerSMALLRIG #ad
Height5.39 cm (2.12 Inches)
Length14.66 cm (5.77 Inches)
Width4.2 cm (1.65 Inches)
Part Number2950-CF

9. Nitze


Nitze Top Handle Stinger handle with built-in QR NATO clamp for Camera and Monitor- PA28-A

Nitze #ad - Multiple attachment points the nitze stinger handle pa28-a is filled with 1/4 ”-20 threaded holes, 1/4” positioning holes and 3/8 ”ARRI positioning holes around the handle to expand more accessories.

Ergonomic design the nitze Stinger handle is ergonomically designed to offer you a more comfortable experience when taking long-term shots. Built-in qr-nato clamp built-in qr-nato clamp on the underside of the handle can be quickly attached and detached using the quick-release lever. Nato built-in nato rail the built-in nato rail on the top of the handle offers convenient attachment of accessories with a NATO clamp. Cold shoe adapter equipped with a cold shoe adapter that can be attached with two 1/4 ”screws. You can mount it on the handle wherever you can't.
BrandNitze #ad
ManufacturerNITZE EU #ad
Height6.6 cm (2.6 Inches)
Length15.2 cm (5.98 Inches)
Width2.9 cm (1.14 Inches)
Part NumberPA28-A



NICEYRIG Camera NATO Top Handle Wooden Grip with 15mm Rod Clamp and Cold Shoe for Camera Camcorder Cage

NICEYRIG #ad - Made of rosewood and aluminum alloy, lightweight and durable. The 15mm rod rail clamp allows for attachment of EVF mount or microphone shock mount and so on. The nato handle is designed for quick release attaching and detaching on the camera cage.

You can twist the thumb screw off, adjust the handle 180 degree for camera and rigs balance or rotate the nato clamp to use this as a side handle. Simply slide onto NATO rail and tighten down the wingnut screw. The handle is equipped with two shoe mounts on the top and at the back respectively for attaching on camera lights, etc.

The handle is ideal for low-mode shooting and easy carrying of your camera. It is also equipped with the hole pattern for ARRI accessory mount pins, microphone shock mounts, so you can attach ARRI compatible extension blocks. Wooden grip offers you a comfort grip. 1/4'' threaded holes on grip could attach additional accessories.
ManufacturerNICEYRIG #ad
Part NumberNato Handle-273
ModelNato Handle-273